Titulo:

DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
.

Sumario:

En este artículo se presenta un análisis cualitativo de la posibilidad de implementar técnicas de control de respuesta sísmica en edificaciones en Colombia. Teniendo en cuenta las condiciones locales actuales de la ingeniería y de las prácticas de construcción en el país, se presentan las principales razones por las que se considera que la técnica de protección pasiva de estructuras sería la más apta para ser implementada en Colombia. Se plantean aspectos deseables para la fabricación y aplicación de disipadores de energía metálicos, y se presentan los disipadores tipo riostras metálicas con pandeo restringido como una opción viable para la protección y control del daño estructural en edificaciones en el país.Abstract: This paper presents a... Ver más

Guardado en:

1794-1237

2463-0950

6

2013-11-06

51

63

Revista EIA - 2013

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.

info:eu-repo/semantics/openAccess

http://purl.org/coar/access_right/c_abf2

id metarevistapublica_eia_revistaeia_10_article_404
record_format ojs
spelling DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
En este artículo se presenta un análisis cualitativo de la posibilidad de implementar técnicas de control de respuesta sísmica en edificaciones en Colombia. Teniendo en cuenta las condiciones locales actuales de la ingeniería y de las prácticas de construcción en el país, se presentan las principales razones por las que se considera que la técnica de protección pasiva de estructuras sería la más apta para ser implementada en Colombia. Se plantean aspectos deseables para la fabricación y aplicación de disipadores de energía metálicos, y se presentan los disipadores tipo riostras metálicas con pandeo restringido como una opción viable para la protección y control del daño estructural en edificaciones en el país.Abstract: This paper presents a qualitative analysis of the possibility of implementing seismic response control techniques in buildings in Colombia. Given the current local conditions in engineering and construction in the country, herein are presented the main reasons why it is considered that the passive control of structures would be the most suitable technique to be implemented in Colombia. Desirable features on the fabrication and application of metallic energy dissipators are exposed, and metallic buckling-restrained braces (BRB) dissipators are presented as one viable option for the protection and control for structural damage of buildings in the country.
Oviedo, Juan Andrés
Duque, María del Pilar
disipador de energía
riostra con pandeo restringido
control pasivo
amortiguador metálico. Keywords
energy dissipator
buckling-restrained brace
passive control
steel damper
6
11
Artículo de revista
Journal article
2013-11-06 00:00:00
2013-11-06 00:00:00
2013-11-06
application/pdf
Fondo Editorial EIA - Universidad EIA
Revista EIA
1794-1237
2463-0950
https://revistas.eia.edu.co/index.php/reveia/article/view/404
https://revistas.eia.edu.co/index.php/reveia/article/view/404
spa
https://creativecommons.org/licenses/by-nc-nd/4.0
Revista EIA - 2013
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.
51
63
https://revistas.eia.edu.co/index.php/reveia/article/download/404/397
info:eu-repo/semantics/article
http://purl.org/coar/resource_type/c_6501
http://purl.org/coar/resource_type/c_2df8fbb1
http://purl.org/redcol/resource_type/ART
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/version/c_970fb48d4fbd8a85
info:eu-repo/semantics/openAccess
http://purl.org/coar/access_right/c_abf2
Text
Publication
institution UNIVERSIDAD EIA
thumbnail https://nuevo.metarevistas.org/UNIVERSIDADEIA/logo.png
country_str Colombia
collection Revista EIA
title DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
spellingShingle DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
Oviedo, Juan Andrés
Duque, María del Pilar
disipador de energía
riostra con pandeo restringido
control pasivo
amortiguador metálico. Keywords
energy dissipator
buckling-restrained brace
passive control
steel damper
title_short DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
title_full DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
title_fullStr DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
title_full_unstemmed DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
title_sort disipadores histeréticos metálicos como técnica de control de respuesta sísmica en edificaciones colombianas (metallic hysteretic dampers as a seismic response control technique in colombian buildings)
title_eng DISIPADORES HISTERÉTICOS METÁLICOS COMO TÉCNICA DE CONTROL DE RESPUESTA SÍSMICA EN EDIFICACIONES COLOMBIANAS (METALLIC HYSTERETIC DAMPERS AS A SEISMIC RESPONSE CONTROL TECHNIQUE IN COLOMBIAN BUILDINGS)
description En este artículo se presenta un análisis cualitativo de la posibilidad de implementar técnicas de control de respuesta sísmica en edificaciones en Colombia. Teniendo en cuenta las condiciones locales actuales de la ingeniería y de las prácticas de construcción en el país, se presentan las principales razones por las que se considera que la técnica de protección pasiva de estructuras sería la más apta para ser implementada en Colombia. Se plantean aspectos deseables para la fabricación y aplicación de disipadores de energía metálicos, y se presentan los disipadores tipo riostras metálicas con pandeo restringido como una opción viable para la protección y control del daño estructural en edificaciones en el país.Abstract: This paper presents a qualitative analysis of the possibility of implementing seismic response control techniques in buildings in Colombia. Given the current local conditions in engineering and construction in the country, herein are presented the main reasons why it is considered that the passive control of structures would be the most suitable technique to be implemented in Colombia. Desirable features on the fabrication and application of metallic energy dissipators are exposed, and metallic buckling-restrained braces (BRB) dissipators are presented as one viable option for the protection and control for structural damage of buildings in the country.
author Oviedo, Juan Andrés
Duque, María del Pilar
author_facet Oviedo, Juan Andrés
Duque, María del Pilar
topicspa_str_mv disipador de energía
riostra con pandeo restringido
control pasivo
amortiguador metálico. Keywords
energy dissipator
buckling-restrained brace
passive control
steel damper
topic disipador de energía
riostra con pandeo restringido
control pasivo
amortiguador metálico. Keywords
energy dissipator
buckling-restrained brace
passive control
steel damper
topic_facet disipador de energía
riostra con pandeo restringido
control pasivo
amortiguador metálico. Keywords
energy dissipator
buckling-restrained brace
passive control
steel damper
citationvolume 6
citationissue 11
publisher Fondo Editorial EIA - Universidad EIA
ispartofjournal Revista EIA
source https://revistas.eia.edu.co/index.php/reveia/article/view/404
language spa
format Article
rights https://creativecommons.org/licenses/by-nc-nd/4.0
Revista EIA - 2013
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.
info:eu-repo/semantics/openAccess
http://purl.org/coar/access_right/c_abf2
type_driver info:eu-repo/semantics/article
type_coar http://purl.org/coar/resource_type/c_6501
type_version info:eu-repo/semantics/publishedVersion
type_coarversion http://purl.org/coar/version/c_970fb48d4fbd8a85
type_content Text
publishDate 2013-11-06
date_accessioned 2013-11-06 00:00:00
date_available 2013-11-06 00:00:00
url https://revistas.eia.edu.co/index.php/reveia/article/view/404
url_doi https://revistas.eia.edu.co/index.php/reveia/article/view/404
issn 1794-1237
eissn 2463-0950
citationstartpage 51
citationendpage 63
url2_str_mv https://revistas.eia.edu.co/index.php/reveia/article/download/404/397
_version_ 1811200485372198912