Titulo:

COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
.

Sumario:

En el presente trabajo se estudió la variabilidad en el desempeño de morteros con el empleo de diferentes lotes de dos tipos de aditivos, uno retardante y uno acelerante de fraguado, para tal fin, se comparó su comportamiento con un mortero sin aditivo. Se analizaron las propiedades físicas, químicas y mecánicas del cemento Pórtland gris tipo III procedente de Cementos Rioclaro, se midieron los tiempos de fraguado inicial y final utilizando diferentes dosis de aditivos, además, se realizaron medidas de resistencia a la compresión de los morteros con aditivo retardante. Se encontró poca variabilidad entre los lotes de los aditivos estudiados; con el aditivo retardante usado se encontró que cuanto mayor es el tiempo de fraguado inicial, mayor... Ver más

Guardado en:

1794-1237

2463-0950

6

2013-11-06

39

49

Revista EIA - 2013

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.

info:eu-repo/semantics/openAccess

http://purl.org/coar/access_right/c_abf2

id metarevistapublica_eia_revistaeia_10_article_403
record_format ojs
spelling COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
En el presente trabajo se estudió la variabilidad en el desempeño de morteros con el empleo de diferentes lotes de dos tipos de aditivos, uno retardante y uno acelerante de fraguado, para tal fin, se comparó su comportamiento con un mortero sin aditivo. Se analizaron las propiedades físicas, químicas y mecánicas del cemento Pórtland gris tipo III procedente de Cementos Rioclaro, se midieron los tiempos de fraguado inicial y final utilizando diferentes dosis de aditivos, además, se realizaron medidas de resistencia a la compresión de los morteros con aditivo retardante. Se encontró poca variabilidad entre los lotes de los aditivos estudiados; con el aditivo retardante usado se encontró que cuanto mayor es el tiempo de fraguado inicial, mayor es el tiempo de fraguado final. Utilizando el aditivo en dosis hasta de 0,6 % en peso del cemento, aumentó el tiempo de retardo a valores entre 550 y 600 min con el aumento del contenido de aditivo. De forma similar, con el aumento en el contenido del aditivo retardante, bajo la resistencia inicial y aumentó la resistencia final del mortero. Con dosis crecientes de aditivo acelerante disminuyó el tiempo de fraguado de las mezclas estudiadas.Abstract: In the present work the variability in the performance of mortars by using different batches of two types of additives, one retardant and one accelerant of setting was studied, for this purpose, their behavior was compared with a mortar without additive. The physical, mechanical, and chemical properties of the gray Portland cement type III from Cementos Rioclaro, the initial and final setting times using different doses of additive were measured; besides, compression strength tests of mortars with retardant additive were made. Between the additives batches studied a small variability was found; the retardant additive used with a content of 0,6 wt % of cement showed that as the higher initial setting time, final setting time is higher. Using the additive in doses up 0,6 % wt of cement and increase of the retard time around 550 y 600 min with the increase in the additive content. Similarly, with the increase of the retardant additive diminishes the initial strength and increases the final strength of the mortar. With growing doses of accelerant content additive diminished the setting time of the mixes studied.
MONTOYA, YIRSON
CADAVID, ALBEIRO
GÓMEZ, MARYORY ASTRID
Cemento Pórtland
aditivo acelerante
aditivo retardante
resistencia mecánica
tiempo de fraguado. Keywords
Portland cement
accelerant additive
retardant additive
mechanical resistance
setting time.
6
11
Artículo de revista
Journal article
2013-11-06 00:00:00
2013-11-06 00:00:00
2013-11-06
application/pdf
Fondo Editorial EIA - Universidad EIA
Revista EIA
1794-1237
2463-0950
https://revistas.eia.edu.co/index.php/reveia/article/view/403
https://revistas.eia.edu.co/index.php/reveia/article/view/403
spa
https://creativecommons.org/licenses/by-nc-nd/4.0
Revista EIA - 2013
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.
39
49
https://revistas.eia.edu.co/index.php/reveia/article/download/403/396
info:eu-repo/semantics/article
http://purl.org/coar/resource_type/c_6501
http://purl.org/coar/resource_type/c_2df8fbb1
http://purl.org/redcol/resource_type/ART
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/version/c_970fb48d4fbd8a85
info:eu-repo/semantics/openAccess
http://purl.org/coar/access_right/c_abf2
Text
Publication
institution UNIVERSIDAD EIA
thumbnail https://nuevo.metarevistas.org/UNIVERSIDADEIA/logo.png
country_str Colombia
collection Revista EIA
title COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
spellingShingle COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
MONTOYA, YIRSON
CADAVID, ALBEIRO
GÓMEZ, MARYORY ASTRID
Cemento Pórtland
aditivo acelerante
aditivo retardante
resistencia mecánica
tiempo de fraguado. Keywords
Portland cement
accelerant additive
retardant additive
mechanical resistance
setting time.
title_short COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
title_full COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
title_fullStr COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
title_full_unstemmed COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
title_sort comportamiento mecánico y de fraguado de morteros de cemento pórtland gris tipo iii con aditivos (mechanical and setting behavior of mortars from gray portland cement type iii with additives)
title_eng COMPORTAMIENTO MECÁNICO Y DE FRAGUADO DE MORTEROS DE CEMENTO PÓRTLAND GRIS TIPO III CON ADITIVOS (MECHANICAL AND SETTING BEHAVIOR OF MORTARS FROM GRAY PORTLAND CEMENT TYPE III WITH ADDITIVES)
description En el presente trabajo se estudió la variabilidad en el desempeño de morteros con el empleo de diferentes lotes de dos tipos de aditivos, uno retardante y uno acelerante de fraguado, para tal fin, se comparó su comportamiento con un mortero sin aditivo. Se analizaron las propiedades físicas, químicas y mecánicas del cemento Pórtland gris tipo III procedente de Cementos Rioclaro, se midieron los tiempos de fraguado inicial y final utilizando diferentes dosis de aditivos, además, se realizaron medidas de resistencia a la compresión de los morteros con aditivo retardante. Se encontró poca variabilidad entre los lotes de los aditivos estudiados; con el aditivo retardante usado se encontró que cuanto mayor es el tiempo de fraguado inicial, mayor es el tiempo de fraguado final. Utilizando el aditivo en dosis hasta de 0,6 % en peso del cemento, aumentó el tiempo de retardo a valores entre 550 y 600 min con el aumento del contenido de aditivo. De forma similar, con el aumento en el contenido del aditivo retardante, bajo la resistencia inicial y aumentó la resistencia final del mortero. Con dosis crecientes de aditivo acelerante disminuyó el tiempo de fraguado de las mezclas estudiadas.Abstract: In the present work the variability in the performance of mortars by using different batches of two types of additives, one retardant and one accelerant of setting was studied, for this purpose, their behavior was compared with a mortar without additive. The physical, mechanical, and chemical properties of the gray Portland cement type III from Cementos Rioclaro, the initial and final setting times using different doses of additive were measured; besides, compression strength tests of mortars with retardant additive were made. Between the additives batches studied a small variability was found; the retardant additive used with a content of 0,6 wt % of cement showed that as the higher initial setting time, final setting time is higher. Using the additive in doses up 0,6 % wt of cement and increase of the retard time around 550 y 600 min with the increase in the additive content. Similarly, with the increase of the retardant additive diminishes the initial strength and increases the final strength of the mortar. With growing doses of accelerant content additive diminished the setting time of the mixes studied.
author MONTOYA, YIRSON
CADAVID, ALBEIRO
GÓMEZ, MARYORY ASTRID
author_facet MONTOYA, YIRSON
CADAVID, ALBEIRO
GÓMEZ, MARYORY ASTRID
topicspa_str_mv Cemento Pórtland
aditivo acelerante
aditivo retardante
resistencia mecánica
tiempo de fraguado. Keywords
Portland cement
accelerant additive
retardant additive
mechanical resistance
setting time.
topic Cemento Pórtland
aditivo acelerante
aditivo retardante
resistencia mecánica
tiempo de fraguado. Keywords
Portland cement
accelerant additive
retardant additive
mechanical resistance
setting time.
topic_facet Cemento Pórtland
aditivo acelerante
aditivo retardante
resistencia mecánica
tiempo de fraguado. Keywords
Portland cement
accelerant additive
retardant additive
mechanical resistance
setting time.
citationvolume 6
citationissue 11
publisher Fondo Editorial EIA - Universidad EIA
ispartofjournal Revista EIA
source https://revistas.eia.edu.co/index.php/reveia/article/view/403
language spa
format Article
rights https://creativecommons.org/licenses/by-nc-nd/4.0
Revista EIA - 2013
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.
info:eu-repo/semantics/openAccess
http://purl.org/coar/access_right/c_abf2
type_driver info:eu-repo/semantics/article
type_coar http://purl.org/coar/resource_type/c_6501
type_version info:eu-repo/semantics/publishedVersion
type_coarversion http://purl.org/coar/version/c_970fb48d4fbd8a85
type_content Text
publishDate 2013-11-06
date_accessioned 2013-11-06 00:00:00
date_available 2013-11-06 00:00:00
url https://revistas.eia.edu.co/index.php/reveia/article/view/403
url_doi https://revistas.eia.edu.co/index.php/reveia/article/view/403
issn 1794-1237
eissn 2463-0950
citationstartpage 39
citationendpage 49
url2_str_mv https://revistas.eia.edu.co/index.php/reveia/article/download/403/396
_version_ 1811200485251612672